SIGHTRIGHT · DECISION TREE
Left or Right on SIGHTRIGHT? A Decision Tree Before You Change Anything
A left or right observation is data to repeat and understand—not a command to force a new stance.

Short answer: left and right describe what you observed relative to a selected cue-ball direction. They do not tell you to move your head or feet. Verify the selected line and trainer placement, complete five no-hit walk-ins with full upright resets, record the pattern, check that movement remains comfortable, and test only one neutral process cue if the evidence is repeatable.
Read the label as an observation
SIGHTRIGHT gives you a visual reference after you choose a direction. Its silver centre line, curved notch and raised visual planes help you compare the standing view with the view at address. It does not select the shot, calculate aim or prescribe one universal head or stance position.
Write the exact sequence rather than relying on a memory of “it looked left.” Left, left, unclear, left, centred is a mostly repeated pattern with exceptions. Left, right, left, right, unclear is a different process question. Neither sequence is proof that a stance, body or eyesight is wrong.
1. Verify the selected line and placement
Choose the intended cue-ball direction independently, then align the trainer’s silver centre reference with that line. Confirm that the accessory is stable and that its planes are visible from the same standing area and at address. Review the SIGHTRIGHT placement guide if the notch, centre line or planes are unclear.
Use a simple layout with enough room for your normal bridge and cue path. The cue, bridge hand, sleeve or another object must not touch the trainer. If the reference moved or visibility is poor, stop and rebuild the layout; do not interpret an uncertain placement.
Keep the direction constant while you check the label. A left reading means the view differed from the chosen reference in that repetition; it does not mean the next shot should be aimed farther right. The purpose of this first step is to make the question precise: are you observing the same selected line and the same reference each time?

2. Repeat without correcting while down
Complete five no-hit walk-ins. Finish choosing the line while standing, enter at a familiar pace and record left, centred, right or unclear after each entry. Do not move your head, feet or the trainer while you are down to create a preferred view.
Stand fully upright and take a real step away after every observation. A partial reset can let the next attempt begin from the previous address. The separate full-reset guide explains how independent repetitions become easier to compare. Keep the cue, table position, lighting and starting area as stable as practical.

3. Check comfort and free movement
If the same left or right label repeats, ask a narrower question: can you remain balanced, breathe normally and move the cue without deliberately holding a pose? Remove the trainer, then make three slow dry observations of ordinary cue clearance. The label is not a reason to push the head opposite, twist the torso or restrict the cue.
A repeatable and comfortable label may simply be your current baseline. If the process feels tense, unstable or visually uncomfortable, return to the last comfortable routine and stop. SIGHTRIGHT is not a medical device or vision-correction device; seek appropriate professional advice for health or eyesight concerns.
4. Test one neutral process cue
Only after placement and the baseline are clear should you test one modest process cue, such as “begin fully upright” or “pause briefly behind the line.” Use an A–B–A sequence: normal entry, the one cue, then normal entry again. Keep the selected line and layout unchanged.
Compare repeatability and comfort, not a demand for a centred label. Do not change foot position, head position, stance width and bridge length together. If the cue creates discomfort or a less usable movement, discard it. If a comfortable difference appears, repeat it on another day before treating it as part of your routine.
Transfer without chasing the centre
Once the no-hit block is complete, remove SIGHTRIGHT completely before any warm-up strokes or ball strikes. Store it safely, then play five simple shots using one process cue. Record setup, intended contact, speed and result separately. A pot or miss cannot prove that a left or right observation caused the outcome.
If the sequence remains mixed, use the guide to feedback that looks random for a broader order of checks. If a pattern returns on a different day and remains comfortable, share the complete sequence with a qualified coach rather than asking for a forced body position.
SIGHTRIGHT provides an alignment-related reference within practice. It cannot diagnose, test or correct vision, and it cannot guarantee accuracy or improvement. “Make no change” is a valid result when the baseline is comfortable and the evidence is limited. For confirmed dimensions and real photographs, see the SIGHTRIGHT product page.
SIGHTRIGHT left/right reading FAQ
Does a left reading mean I should move my head right?
No. Left and right are observations of the selected reference, not instructions for moving your head, feet or stance. Verify placement, repeat the process and keep any change comfortable.
How many SIGHTRIGHT repetitions should I record?
Use five no-hit walk-ins after full upright resets as a starting block, then confirm a stable pattern in a later block or session. A single reading is not a reliable basis for a change.
What should I do when the label changes between repetitions?
Record left, centred, right or unclear exactly as observed. Check placement, visibility, starting area and reset quality before testing one process cue; do not correct while down.
Can SIGHTRIGHT diagnose eyesight or guarantee better accuracy?
No. SIGHTRIGHT is a practice accessory that provides an alignment-related visual reference after you select a direction. It does not test or correct vision, diagnose a condition or guarantee accuracy or improvement.
SIGHTRIGHT TRAINING AID
Make one observation easier to interpret
Use a stable reference, full resets and a clear stop rule before returning to ordinary cue-sports practice.
